Eternus DX60 S4 + windows 2008r2 troubles

FibreCAT SX, FibreCAT NX, FibreCAT TX, ETERNUS DX, ETERNUS LT, ETERNUS CS

Moderator: ETERNUS Moderator Team

shamota_s@mail.ru
Posts: 2
Joined: Mon Aug 06, 2018 12:06
Product(s): Eternus DX60S4

Eternus DX60 S4 + windows 2008r2 troubles

Postby shamota_s@mail.ru » Mon Aug 06, 2018 13:45

I have Fujitsu Eternus DX60S4 set up on the manual from the official site of Fujitsu. Connected via iSCSI to the server running Windows Server 2008r2. All is normally connected to the "iSCSI Initiator" connection in the "connected" status. But in "Device Manager" in the "Disk Drives" tab new devices did not appear. I do not understand what's wrong? I check LUN but everything is ok.

shamota_s@mail.ru
Posts: 2
Joined: Mon Aug 06, 2018 12:06
Product(s): Eternus DX60S4

Re: Eternus DX60 S4 + windows 2008r2 troubles

Postby shamota_s@mail.ru » Mon Aug 06, 2018 13:50

Maybe there are instructions for configuring iscsi for Windows 2008r2?

Davie
Posts: 557
Joined: Fri Jun 10, 2005 0:01
Product(s): PRIMERGY, ServerView
Location: UK

Re: Eternus DX60 S4 + windows 2008r2 troubles

Postby Davie » Tue Aug 07, 2018 12:29

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (iSCSI) for Windows

http://support.ts.fujitsu.com/IndexDown ... 46C4C77B20


Return to “Storage solutions”

Who is online

Users browsing this forum: No registered users and 4 guests