celsius h760 bios update problem

Moderator: ModTeam

bip
Posts: 2
Joined: Fri May 04, 2018 10:50
Product(s): celsius h760

celsius h760 bios update problem

Postby bip » Mon May 07, 2018 8:19

hi,
i have a celsius h760 workstation and i can not install the bios update.
I tried in every way with both the deskupdate and manually with HOBV125UpdateEn.exe but it returns me a blue error screen "insydeh20 secure flash error: invalid firmware image !!!"

I wanted to try DOS but I can not start the workstation in DOS, I can not read the usb bootable.

I also tried to disable secure boot but nothing to do.

Any ideas to solve?
Thanks in advance

my config:
SO Microsoft Windows 10 Pro x64
CELSIUS H760
Intel(R) Xeon(R) CPU E3-1505M v5 @ 2.80GHz, 2801 Mhz
SMBIOS 2.8
BIOS UEFI
BIOS ver. 1.16

Diplodocus
Posts: 21
Joined: Fri Apr 28, 2017 14:16
Product(s): Various

Re: celsius h760 bios update problem

Postby Diplodocus » Thu May 10, 2018 11:21

Hi bip,

Where have you sourced the BIOS update from? I do not recognise the "HOBV125UpdateEn.exe" file you mention.

Please download the latest BIOS from:
http://support.ts.fujitsu.com/IndexDown ... A8C9FC6610
This is the latest BIOS.

Also please note the below


BIOS Update - supporting FUJITSU Notebook PCs and Tablet PCs
_______________________________________________________________________________________

- Inventory -

1. Introduction
2. Preparation
3. BIOS Update Procedure
_______________________________________________________________________________________

1. Introduction

This package contains BIOS and ME FW update for Windows and DOS environment.

BIOS and ME FW update in Windows environment can be made locally on your system using the *.exe file.

PRECONDITION:

The FUJITSU BIOS driver needs to be installed to the system.
It can be found at http://support.ts.fujitsu.com (“GABI Interface”)

The Intel(R) Active Management Technology Driver needs to be installed to the system
It can be found at http://support.ts.fujitsu.com (“AMT”)

Tools for remote/unattended BIOS update in Windows environment and for BIOS update in DOS environment can be found in the Admin folder.
To update the ME FW please use the ME FW update tool which can be found in the driver section under AMT or MEI at the FUJITSU Support Page.

_______________________________________________________________________________________

2. Preparation

After downloading the *.zip file you need to extract all files/folders/subfolders to the desired directory of your hard drive.

Admin – DOS
Please copy the folder including all files (\DOS) to an e.g. FreeDOS bootable media (e.g. USB Memory Stick).
You can create a FreeDOS bootable USB Memory Stick using the following link:

Win7:
http://support.ts.fujitsu.com/indexdown ... AB265A9690

Win8, 8.1, 10:
http://support.ts.fujitsu.com/indexdown ... FF4A1C2869

WARNING:
ALL DATA STORED ON THE USB MEMORY STICK WILL BE ERASED PERMANENTLY
PLEASE ENSURE THAT A DATA BACKUP HAS BEEN DONE BEFORE.

Admin – Windows (if available)
Please copy the folder including all files (\WINDOWS) to the desired directory of your hard drive.

_______________________________________________________________________________________

3. BIOS Update Procedure

BIOS and ME FW update
Run the xxxUpdateEn.exe file to update the BIOS and ME FW.

Admin – DOS
Run \DOS\DOSflash.bat to update the BIOS in DOS environment.

Admin – Windows (if available)
For automated BIOS Updates we recommend to use the DeskView / DeskFlash solution
(http://www.fujitsu.com/de/solutions/bus ... ageability
using the BIOS files in BUP file format.

_______________________________________________________________________________________
Diplodocus :D

bip
Posts: 2
Joined: Fri May 04, 2018 10:50
Product(s): celsius h760

Re: celsius h760 bios update problem

Postby bip » Fri May 11, 2018 11:15

Diplodocus thanks for the reply.
The utility "HOBV125UpdateEn.exe" is in the zip file containing the bios that you have linked to me
http://support.ts.fujitsu.com/IndexDown ... A8C9FC6610

I followed all the instructions but I can not update the bios.

Also I can not boot the workstation with DOS bootable usb to try the flash in DOS mode :( .
Thank you


Return to “CELSIUS Mobile Workstations”

Who is online

Users browsing this forum: No registered users and 0 guests