I have an RX200 S8 R1 and try to add an additional graphic card (Nvidia NVS300) without success.
The card is in the Slot 1, the status is OK in iRMC but the server won't start and is stuck at the Fujitsu bootup screen (I can't access the bios without removing the new graphic card).
Did I missed any specific parameter in the BIOS ?
Bios and iRMC firmwares are up to date :
Bios V220.127.116.11 R1.18.0
iRMC rev 9.08F, SDR rev 3.62
Any help would be greatly appreciated !