Parallel port PCI drivers not installed

SCALEO E, SCALEO H, SCALEO X, SCALEO L, SCALEO P

Moderator: ModTeam

colladon
Posts: 2
Joined: Wed Nov 07, 2012 23:31
Product(s): Scaleo Pi2510

Parallel port PCI drivers not installed

Postby colladon » Thu Nov 08, 2012 12:23

I have installed Windows 7 Prof. on a Scaleo Pi2510. The parallel port doesn't work, cannot print. Device Manager says "drivers not installed". Where can I find the driver -- not on Fujitsu website?

me@work
Posts: 945
Joined: Thu Jun 22, 2006 15:32
Product(s): Scaleo Pi2662, Primergy

Re: Parallel port PCI drivers not installed

Postby me@work » Thu Nov 08, 2012 14:11

I would assume that there are no parallel port drivers available at any hardware system manufacturer in the world. These generic drivers come with the OS itself. This story might be different for vendors of specific parallel port plug-in cards, of course.

If the driver did not load, then there probably is some kind of issue with the required resources (I/O ports, interrupt, ...). You might want to try to test again after removal of any add-in card, and after setting the BIOS to its default settings.

Hope this helps...

colladon
Posts: 2
Joined: Wed Nov 07, 2012 23:31
Product(s): Scaleo Pi2510

Re: Parallel port PCI drivers not installed

Postby colladon » Thu Nov 08, 2012 15:13

Many thanks. I was very surprised by that a specific driver was needed. I don't think there are any add-on cards. The parallel port is on the motherboard. I will check in the BIOS and maybe re-load Windows 7.


Return to “SCALEO”

Who is online

Users browsing this forum: No registered users and 0 guests