[RX100S4] reset irmc password

PRIMERGY, PRIMEPower

Moderator: ModTeam

salam
Posts: 2
Joined: Thu Aug 07, 2008 15:44
Product(s): RX100S4

[RX100S4] reset irmc password

Postby salam » Thu Aug 07, 2008 15:45

Hello,

Is there a way to reset irmc password to default admin/admin as in factory settings? I forgot the password, looked in the bios, but there is no option to reset irmc.

Asic
Posts: 37
Joined: Tue May 23, 2006 19:20

Re: [RX100S4] reset irmc password

Postby Asic » Thu Aug 07, 2008 19:12

Hello,

you can try this:

Load the latest Flash FW for iRMC for RX100S4 from the FSC download site.
http://support.fujitsu-siemens.com/com/support/downloads.html

Create a bootable stick with it and boot from this stick.
When you're asked to flash iRMC stop the batch job. Now start "ipmiview" manually, which is on this stick. Here in ipmiview you can add/enter/change etc. your iRMC accounts

good luck
Asic

User avatar
elsie
Posts: 129
Joined: Wed May 28, 2008 20:46
Product(s): Servers, Networking

Re: [RX100S4] reset irmc password

Postby elsie » Mon Aug 11, 2008 10:15

If you still have ServerView installed, you may be able to change the password from within the System Configuration Utility. Otherewise SCU is available on ServerStart

salam
Posts: 2
Joined: Thu Aug 07, 2008 15:44
Product(s): RX100S4

Re: [RX100S4] reset irmc password

Postby salam » Mon Aug 11, 2008 10:22

thanks, i'll give it a try when i come to the system.
i was studying manuals, but failed at point "boot from cd" as none of the 5CDs supplied with the system was bootable.
another funny part is, that in the irmc manual, password reset is not even mentioned, though i don't think it is a rare issue that the user forgets a password(after 3+ months without login to irmc).

anyway, i'll try all the possibilities, and i hope at least one of them will work


Return to “Server Products”

Who is online

Users browsing this forum: No registered users and 1 guest