Linux auf Tablett PC's

Moderator: ModTeam

friendly.name
Posts: 160
Joined: Sun Feb 15, 2004 1:01
Location: Germany

Linux auf Tablett PC's

Postby friendly.name » Fri Dec 23, 2005 11:00

Hallo,
Alle neueren Stylistic (mit Wacom Digitizer) und das LIFEBOOK T läufen unter Linux.

Ich teile das Topic ein bischen auf. hoffe es wird dadurch übersichtlicher.

Gruss
Friendly.name
friendly.name

friendly.name
Posts: 160
Joined: Sun Feb 15, 2004 1:01
Location: Germany

Was muss alles installiert werden.

Postby friendly.name » Fri Dec 23, 2005 11:04

Während der Installation sollten schon die Wacom Treiber und das Onscreen Keyboard xvkbd mit installiert werden.

Actually i don't use the wacomtools. The settings inside of the XF86Config are working fine for me.

The digitizer is connected via serial port to the chipset. Some settings have to be added to

SuSE 9.2 / 9.3
/etc/init.d/boot.local
setserial /dev/ttyS0 uart 16550
setserial /dev/ttyS0 irq 4 (not really need, better save than sorry)
setserial /dev/ttyS0 port 0x220

Fedora Core 4
/etc/rc.local
setserial /dev/ttyS0 uart 16550
setserial /dev/ttyS0 irq 4 (not really need, better save than sorry)
setserial /dev/ttyS0 port 0x220

Debian 3.1 (sarge)
/usr/share/doc/setserial/serial.conf
Modify one of the lines to fit to the needs of the serial port /dev/ttyS0

Now we need a onscreen keyboard, otherwise we are not able to login.
SuSE 9.2
Maybe there is a better place to start xvkbd, added to /etc/X11/xdm/Xsession, nearly the end of the file, the following line.
/usr/X11R6/bin/xvkbd &

SuSE 9.3
Edit /etc/X11/xdm/Xsetup
/usr/X11R6/bin/xvkbd &
Insert at the Beginning of the script

Fedora Core 4
Edit /usr/X11/xdm/Xsetup_0
add /usr/X11R6/bin/xvkbd -geometry -0-0 &

Debian 3.1 (Sarge)
Edit /etc/kde3/kdm/Xsetup
add /usr/X11R6/bin/xvkbd -geometry -0-0 &
friendly.name

friendly.name
Posts: 160
Joined: Sun Feb 15, 2004 1:01
Location: Germany

Die xorg.conf

Postby friendly.name » Fri Dec 23, 2005 11:09

Auch die xorg.conf muß angepasst werden.

Section "InputDevice"
Driver "wacom"
Identifier "Cursor"
Option "TopX" "0"
Option "TopY" "0"
#12,1 inch display
Option "BottomX" "24576"
#10,4 inch display
# Option "BottomX" "21088"
#12,1 inch display
Option "BottomY" "18432"
#10,4 inch display
# Option "BottomY" "15700"
Option "Device" "/dev/ttyS0"
Option "Mode" "Absolute"
# Option "InputFashion" "Tablet"
# Option "Mode" "Absolute"
# Option "Name" "GRAPHIRE / INTUOS (SERIAL)"
# Option "SendCoreEvents" "on"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"
Option "TPCButton" "on"
Option "Threshold" "2"
Option "Vendor" "WACOM"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "Stylus"
Option "TopX" "0"
Option "TopY" "0"
#12,1 inch display
Option "BottomX" "24576"
#10,4 inch display
# Option "BottomX" "21088"
#12,1 inch display
Option "BottomY" "18432"
#10,4 inch display
# Option "BottomY" "15700"
Option "Device" "/dev/ttyS0"
Option "Mode" "Absolute"
# Option "InputFashion" "Pen"
# Option "Mode" "Absolute"
# Option "Name" "GRAPHIRE / INTUOS Stylus (SERIAL)"
# Option "Protocol" "Auto"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"
# Option "ButtonM" "N" where "M" is the button number and "N" is the function. In our case the lower button is No. 2, the # upper button is No.3. Function 2 is middle mouse button, function 3 is a left mouse click.
Option "Button2" "3"
Option "Button3" "2"

Option "TPCButton" "on"
Option "Threshold" "2"
Option "Vendor" "WACOM"
EndSection

# Only needed with a special pen like the WACOM Cross Pen #
# Only works with some graphic apps. e.g. Gimp #
Section "InputDevice"
Driver "wacom"
Identifier "Eraser"
Option "TopX" "0"
Option "TopY" "0"
#12,1 inch display
Option "BottomX" "24576"
#10,4 inch display
# Option "BottomX" "21088"
#12,1 inch display
Option "BottomY" "18432"
#10,4 inch display
# Option "BottomY" "15700"
Option "Device" "/dev/ttyS0"
Option "Type" "eraser"
Option "Mode" "Absolute"
Option "ForceDevice" "ISDV4"
Option "TPCButton" "on"
Option "Threshold" "2"
Option "Vendor" "Wacom"
EndSection


Bitte die Section Server Layout nicht vergessen. Sollte ungefähr so aussehen.

Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
InputDevice "Cursor" "SendCoreEvents"
InputDevice "Stylus" "SendCoreEvents"
InputDevice "Eraser" "SendCoreEvents"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection
friendly.name

friendly.name
Posts: 160
Joined: Sun Feb 15, 2004 1:01
Location: Germany

Touchpad beim T4010.

Postby friendly.name » Fri Dec 23, 2005 11:10

Auch hier kann man in der xorg.conf einiges drehen.

With this options the scroll buttons will work, The right edge can be used to scroll up and down, the lower edge can be used to scroll left and right. Probably there is a possiblility to start application by tip a corner?

Section "InputDevice"
Driver "synaptics"
Identifier "Mouse[1]"
Option "AccelFactor" "0.01"
Option "BottomEdge" "650"
Option "CircScrollDelta" "0.1"
Option "CircScrollTrigger" "2"
Option "CircularScrolling" "1"
Option "Device" "/dev/psaux"
Option "EdgeMotionMaxSpeed" "15"
Option "EdgeMotionMinSpeed" "15"
Option "EmulateMidButtonTime" "75"
Option "EmulateWheel" "on"
Option "EmulateWheelButton" "4"
Option "FingerHigh" "15"
Option "FingerLow" "14"
Option "HorizScrollDelta" "20"
Option "InputFashion" "Mouse"
Option "LeftEdge" "120"
Option "MaxSpeed" "0.5"
Option "MaxTapMove" "110"
Option "MaxTapTime" "180"
Option "MinSpeed" "0.2"
Option "Name" "ALPS;Touchpad"
Option "Protocol" "auto-dev"
Option "RightEdge" "830"
Option "SHMConfig" "on"
Option "TopEdge" "120"
Option "UpDownScrolling" "1"
Option "VertScrollDelta" "20"
Option "ZAxisMapping" "4 5"
EndSection
friendly.name

friendly.name
Posts: 160
Joined: Sun Feb 15, 2004 1:01
Location: Germany

Postby friendly.name » Fri Feb 17, 2006 22:22

Great, there is a Touch Screen Driver which supports the LIFEBOOK P1510 available at http://www.conan.de.
friendly.name


Return to “STYLISTIC Tablet PC”

Who is online

Users browsing this forum: No registered users and 1 guest