Postby morphcore » Sat Sep 10, 2005 15:11
hi folks.<P>i got a celsius m410 with <BR>2x 256MB, DDR, 333, CL2.5 ECC RAM<P>now i bought one<BR>1024MB, DDR, 333, CL2.5 ECC RAM<BR>to expand the memory.<P>when the 1GB-RAM is installed onto the MB<BR>(into the 3rd RAM slot) and i start my computer the screen stays<BR>black, but the computer boots normaly (HD spins, Fans spin etc)<P>when the other 2 RAM's are not installed<BR>and i only install the 1GB-RAM the problem<BR>stays the same.<P>so i tried to update my BIOS with the BIOS<BR>update shown in the driver download area<BR>on this homepage (my pc ID is YBTB009083).<BR>when i try to install the update via floppy<BR>onto my system following message is shown<BR>while the flash memory check:<P>PART ID NOT FOUND IN TABLE OF SUPPORTED PARTS<BR>PRESS ANY KEY TO REBOOT<P>this is my problem. and i don't know how to fix it. is the RAM broken or does my MB not support such RAM types.<P>