You need to go to BIOS Setup and change the Large Disk access mode from DOS to Other because your drive is using LBA and not CHS to access data.
I have already tried setting the mode to DOS, but got no help. What should be the value of "LBA Translation Mode", i assume it should be LBA, but right now in my BIOS its being set to PTL.
And in the BIOS manual its mentioned:
"A hard disk can only be operated using the LBA translation mode that was set prior to partitioning. This is because the three LBA translation modes use different algorithms to convert physical disk geometry into logical disk geometry.
So remember: Never change the LBA translation mode for a disk that has already been written on.
You can only use a hard disk in a different system if the system supports the same LBA translation mode as the one originally set for the hard disk."
So I am afraid of changing the LBA Translation mode to "LBA".
Should i try to change this value also.
Currently I am using a windows boot disk to boot into the system.