Install an OS with Server Guide in Primergy BX600 S2 Blade

PRIMERGY, PRIMEPower

Moderator: ModTeam

Nicola
Posts: 3
Joined: Mon Feb 05, 2007 18:10

Install an OS with Server Guide in Primergy BX600 S2 Blade

Postby Nicola » Tue Feb 06, 2007 11:25

For installing an OS in a server blade (not use PXE installation) I must connect the USB CD-ROM drive to the USB port of the server.
But the two USB interfaces (both USB!?) are of different type.
I'm not able to connect each other.

Another question is about priority device boot sequence.
The CD-ROM USB device is available only when it is attached to the blade server via USB (the same above).

Thans.

Nicola
:(

Data
Posts: 131
Joined: Fri Apr 06, 2001 0:01

Postby Data » Tue Feb 06, 2007 16:52

Hello Nicola

I think you're missing the Front USB/VGA Breakout Cable
This cable consists out of a VGA connector and 2 USB connectors it enables you to connect your USB CD-ROM drive to the server.

Regards.
Data.

Nicola
Posts: 3
Joined: Mon Feb 05, 2007 18:10

Install OS via CD-ROM

Postby Nicola » Tue Feb 06, 2007 18:07

Thanks for your help.
Infact I need the USB/VGA cable and I've found it now in a box in CED!

Bye,

Nicola


Return to “Server Products”

Who is online

Users browsing this forum: No registered users and 1 guest