Hello,
I have a question to configure a hot spare on a TX200 with an adaptec 2010s Raid Controller. Now our configuration looks like this:
Raid1 Array0 2 x 36GB Bus0
Raid5 Array1 3 x 73GB Bus0
Hot Spare 1 x 73GB Bus0 (protect only Raid1)
Now my problem. Is it possible to protect Raid1 and Raid5 with the hot spare. When I read the manuals for the controller, I get the impression the controller will configure automatic both Raidsystems protect with hot spare, when I click the button "Make hot spare". But shown in the storage manager only the the raid1 is protect. What can I do to protect Raid5, too? Or do I need a second hot spare to protect both?
Thanks for your help in advance.
Kay