HDD green led static

PRIMERGY, PRIMEPower

Moderator: ModTeam

Omniatech
Posts: 1
Joined: Mon Dec 03, 2012 13:36
Product(s): primergy

HDD green led static

Postby Omniatech » Tue Dec 04, 2012 12:49

change a hard drive with a new 15,000 rpm the rest are 10,000, the hard drive works but the LED remains static truth.

Image

Is it normal?

thanks :wink:

me@work
Posts: 949
Joined: Thu Jun 22, 2006 15:32
Product(s): Scaleo Pi2662, Primergy

Re: HDD green led static

Postby me@work » Tue Dec 04, 2012 15:29

Maybe yes, or maybe not...

If the access LED stays lit up in static green, it could indicate permanent access, e.g. during a copyback/rebuild operation. But in such a situation, the LED(s) of the other disks (at least one in a RAID1) would also be lit. Another possibility could be a disk test currently running.

Could you try and check the status of the controller and the disks attached to it through ServerView RAID?

But most likely IMHO is that the disk is not an original Fujitsu delivered one, and its firmware does not operate too well with the controller.


Return to “Server Products”

Who is online

Users browsing this forum: No registered users and 0 guests