I have installed the latest version of ServerView RAID, which installs and starts successfully. I can login via the web page and everything looks great. I am then running the following command to connect to my ESXi (TX 200 S6 with a RAID 5/6 512MB card) server:-
amCLI -e 21/0 add_server name=ESXiServer port=5989 username=root password=*
I then restart aurad and it bombs immediately. I have edited /etc/init.d/aurad to enable debugging of amDaemon which produces the following output:-
Cannot adopt OID in FSC-RAID-MIB: svrTrapConsistencyCheckContinuedOnLogicalDrive ::= { svrNotifications# 10845 }
Cannot adopt OID in FSC-RAID-MIB: svrNumberLogicalDrives ::= { svrLogicalDriveInfo 1 }
Cannot adopt OID in FSC-RAID-MIB: svrLogicalDriveTable ::= { svrLogicalDriveInfo 2 }
Cannot adopt OID in FSC-RAID-MIB: svrLogicalDriveContentsTable ::= { svrLogicalDriveInfo 3 }
Cannot adopt OID in FSC-RAID-MIB: svrStatusLogicalDrives ::= { svrStatus 1 }
Cannot adopt OID in FSC-RAID-MIB: svrStatusPhysicalDevices ::= { svrStatus 2 }
Cannot adopt OID in FSC-RAID-MIB: svrStatusControllers ::= { svrStatus 3 }
Cannot adopt OID in FSC-RAID-MIB: svrStatusOverall ::= { svrStatus 4 }
snmp_parse_oid(name): Unknown Object Identifier (Sub-id not found: (top) -> svrObjects)
svrNotifications: Unknown Object Identifier (Sub-id not found: (top) -> svrNotifications)
piPSX4: Initialize: adapter count is 0
piAdpARC5: Initialize: adapter count is 0
piLSIMegaLib: Initialize: adapter count is 0
piLSIStoreLibIR2: Initialize: adapter count is 0
piLSIStoreLibIR: Initialize: adapter count is 0
piLSIStoreLib: Initialize: adapter count is 0
piFJR2Aries: Initialize: adapter count is 0
piLMD: Initialize: adapter count is 1
/etc/init.d/aurad: line 256: 4564 Segmentation fault $EXECDIR/amDaemon -k
If I use an older version of ServerView RAID then it works OK. Any ideas?