Fibrecat TX08 & Arcserve 11.5 SP4

Moderator: ETERNUS Moderator Team

Posts: 1
Joined: Thu Apr 30, 2009 16:56
Product(s): Fibrecat TX08

Fibrecat TX08 & Arcserve 11.5 SP4

Postby infogero » Thu Apr 30, 2009 17:11


We've just purchased a Fibrecat tx08 unit (sas interface) which we would like to use with Arcserve 11.5

After having patched Arcserve to SP4 (build 4490) we are able to see the unit correctly in the device section of Arcserve.
Althought all the slots are loaded with new tapes and the code bar labels are correctly shown in the Fibrecat remote management utility, in Arcserve, when looking through the device section, all the slots are shown as empty. We are therefore unable to create a new media pool (as no media are available) and start a GFS rotation for our backups.

your help will be much appreciated.

Many thanks beforehand and regards.

Posts: 19
Joined: Tue Sep 16, 2008 8:56
Product(s): FibreCAT TX

Re: Fibrecat TX08 & Arcserve 11.5 SP4

Postby Maxxx » Wed May 06, 2009 15:12


the FibreCAT TX08 is released for CA BrightStor ARCserve Backup r11.5 for Linux SP 3 and
CA BrigthStor ARCserve SP1 V 12.0 Build 5454 Windows 2003 / 2008

To check the HW please use our FLATt Tool library function list. It will be send to you when sending a request to

Best regards

Posts: 1
Joined: Wed May 06, 2009 14:54
Product(s): All Fujitsu Server Intel/Amd based and FiberCat.
Location: Lausanne/Renens

Re: Fibrecat TX08 & Arcserve 11.5 SP4

Postby Pascal_G » Wed May 06, 2009 15:14

En réponse au forum afin de faire profiter la communauté de cette erreur :

Le Mode de Contrôle de la bibliothèque doit être sur Random lorsque l'application de sauvegarde la contrôle.
Le Mode Sequential (séquentiel) doit être utilisé que si la biliothèque n'est pas du tout piloté par l'application.

La configuration se trouve : MENU - CONFIGURATION - Library Settings - Mode [RANDOM] [SEQUENTIAL]


Return to “Archive”

Who is online

Users browsing this forum: No registered users and 1 guest