BIOS Update - supporting FUJITSU Notebook PCs and Tablet PCs
_______________________________________________________________________________________
- Inventory -
1. Introduction
2. Preparation
3. BIOS Update Procedure
_______________________________________________________________________________________
1. Introduction
This package contains BIOS and ME FW update for Windows and DOS environment.
BIOS and ME FW update in Windows environment can be made locally on your system using the *.exe file.
PRECONDITION:
The FUJITSU BIOS driver needs to be installed to the system.
It can be found at
http://support.ts.fujitsu.com (“GABI Interface”)
The Intel(R) Active Management Technology Driver needs to be installed to the system
It can be found at
http://support.ts.fujitsu.com (“AMT”)
Tools for remote/unattended BIOS update in Windows environment and for BIOS update in DOS environment can be found in the Admin folder.
To update the ME FW please use the ME FW update tool which can be found in the driver section under AMT or MEI at the FUJITSU Support Page.
_______________________________________________________________________________________
2. Preparation
After downloading the *.zip file you need to extract all files/folders/subfolders to the desired directory of your hard drive.
Admin – DOS
Please copy the folder including all files (\DOS) to an e.g. FreeDOS bootable media (e.g. USB Memory Stick).
You can create a FreeDOS bootable USB Memory Stick using the following link:
Win7:
http://support.ts.fujitsu.com/indexdown ... AB265A9690Win8, 8.1, 10:
http://support.ts.fujitsu.com/indexdown ... FF4A1C2869WARNING:
ALL DATA STORED ON THE USB MEMORY STICK WILL BE ERASED PERMANENTLY
PLEASE ENSURE THAT A DATA BACKUP HAS BEEN DONE BEFORE.
Admin – Windows (if available)
Please copy the folder including all files (\WINDOWS) to the desired directory of your hard drive.
_______________________________________________________________________________________
3. BIOS Update Procedure
BIOS and ME FW update
Run the xxxUpdateEn.exe file to update the BIOS and ME FW.
Admin – DOS
Run \DOS\DOSflash.bat to update the BIOS in DOS environment.
Admin – Windows (if available)
For automated BIOS Updates we recommend to use the DeskView / DeskFlash solution
(
http://www.fujitsu.com/de/solutions/bus ... ageabilityusing the BIOS files in BUP file format.
_______________________________________________________________________________________