Hello all.
I have just camed across a Celsius R670-2 with 4 g of RAM, 1 xeon E5540, and a quadro fx3800. I would like to upgrade it somehow and transform it into a budget workstation. I was thinking of dual w5590 or 5580 processors and fill the ram bays. Would it still perform for basic CAD and CAM for fusion360 and solidworks?
Celsius R670 cpu upgrade
Moderator: ModTeam
-
AlexandruI
- Posts: 3
- Joined: Wed Feb 28, 2024 13:54
- Product(s): Celsius R670-2
-
Ask Fujitsu
- Moderator
- Posts: 747
- Joined: Fri Aug 02, 2019 10:02
- Product(s): n/a
- Contact:
Re: Celsius R670 cpu upgrade
Hello,
Thank you for contacting Fujitsu.
According to the information on CAD/CAM requirements, a 3+ GHz with quad core or higher CPU, along with 16+ GB Ram should work fine, as they are the recommended requirements, and the mentioned components seem to fulfill such requirements.
Please, be aware that this is an End of sercive equipment, and no support is provided for it by Fujitsu, and any change made by the customer falls under customer responsibility.
Kind regards,
Forum Support Team
Thank you for contacting Fujitsu.
According to the information on CAD/CAM requirements, a 3+ GHz with quad core or higher CPU, along with 16+ GB Ram should work fine, as they are the recommended requirements, and the mentioned components seem to fulfill such requirements.
Please, be aware that this is an End of sercive equipment, and no support is provided for it by Fujitsu, and any change made by the customer falls under customer responsibility.
Kind regards,
Forum Support Team
-
AlexandruI
- Posts: 3
- Joined: Wed Feb 28, 2024 13:54
- Product(s): Celsius R670-2
Re: Celsius R670 cpu upgrade
Thank you for your kind reply.
Can I use non ecc Ram with this motherboard with 2 CPU’s?
Can I use non ecc Ram with this motherboard with 2 CPU’s?
Return to “CELSIUS Workstations”
Who is online
Users browsing this forum: No registered users and 1 guest