Temp. to high

Moderator: ModTeam

Celsius W420
Posts: 1
Joined: Mon Aug 12, 2019 14:26
Product(s): Fujitsu Celsius W420 Intel I7-3770

Temp. to high

Postby Celsius W420 » Tue Aug 13, 2019 12:18

Hello, the temp. of my Fujitsu Celsius W420 is very high, sometimes 80 gr. C. The large vetilator at the front runs with start up but when the PC is started it stops, it wants to run (you can feel that) but does not get enough tension from the PWM control. Are there programs that can control the fans in speed?
Speedfan does not work because it does not see any sensors from my motherboard (D3162-C12 GS1. In the Bios, the control is set to Auto.

xberg
Posts: 16
Joined: Thu Jan 11, 2018 11:57
Product(s): Fujitsu Celsius R930

Re: Temp. to high

Postby xberg » Tue Nov 19, 2019 9:25

Hi,
Is there another PWM plug on your board you could try?
Do you have another fan to test? It could just be a problematic fan. PWM fans are less than 10 euros so I would recommend starting there.


Return to “CELSIUS Workstations”

Who is online

Users browsing this forum: No registered users and 1 guest