Fujitsu R940 - GPU EVGA FTW GTX 670 - 2x 6pin - 3 long beeps - No Video Output

Moderator: ModTeam

viktormadarasz
Posts: 1
Joined: Wed Apr 12, 2017 11:02
Product(s): Fujitsu R940

Fujitsu R940 - GPU EVGA FTW GTX 670 - 2x 6pin - 3 long beeps - No Video Output

Postby viktormadarasz » Thu Apr 13, 2017 9:54

Hi

I have a Fujitsu R940 YM9N model with a 1000W PSU and 2x GPU Power rails on it ( official Fujitsu cables with the 6 Pin and 8 Pin connectors on each one of the cables)

I Placed an EVGA FTW 670 on my PCIE x16 slot ( tried in CPU0 CPU1 and PCH Slots respectively)

All I get on power on is 3 long beeps after a while, dark screens no video ouput.

All fans running OK including the GPU-s one

in the rest of the computer all I have is 1 official 500 GB SATA 3 HDD and a Sound card Asus D2X which uses a floppy power connector from a converter of SATA power.

I have 2x Xeon E2603 v4 CPU-s

System boots fine with video output OK with the original Nvidia NVS 315 and my old Geforce GT 220 also ( none of those use extra 6 Pin power plugs for the record)

Thanks a lot

Regards

Viktor

Diplodocus
Posts: 21
Joined: Fri Apr 28, 2017 14:16
Product(s): Various

Re: Fujitsu R940 - GPU EVGA FTW GTX 670 - 2x 6pin - 3 long beeps - No Video Output

Postby Diplodocus » Tue May 02, 2017 9:50

Hi there,

I would recommend that you update the BIOS to the latest version as there appears to be lots of graphics related issues in the older BIOS from the release notes.

Also, have you checked that you are installing the card into the right PCI-E slots. Looking at the Mainboard manual for the system I think that you should place the card in either slot 4 or 6 especially if you are using two graphics cards.

Diplodocus :D
Diplodocus :D


Return to “CELSIUS Workstations”

Who is online

Users browsing this forum: No registered users and 3 guests