W530 display problems

Moderator: ModTeam

drecki
Posts: 2
Joined: Tue Dec 08, 2015 22:45
Product(s): w530

W530 display problems

Postby drecki » Wed Dec 09, 2015 8:39

Got me a used w530.
Video only runs through VGA, while there are also connectors for DVI and Displayport.
Display is working fine, tested on other systems.
When trying to connect through DVI or displayport the W530 beeps 3 times during booting and screen shows 'no signal'.

drecki
Posts: 2
Joined: Tue Dec 08, 2015 22:45
Product(s): w530

Re: W530 display problems

Postby drecki » Wed Dec 16, 2015 19:27

After searching the net I found the following;

Enter Bios

BOOT/CSM CONFIG set video to; "LAUNCH VIDEO OPROM TO UEFI ONLY"

save and exit

Enter bios again and disable SECURE BOOT.

After this it should work, but still under ADVANCED/ AMI GRAPHIC PROTOCOL POLICY/OUTPUT SELECT I can still only choose for CRT1


Return to “CELSIUS Workstations”

Who is online

Users browsing this forum: No registered users and 1 guest