Postby Ask Fujitsu » Wed May 25, 2022 13:20
Hello and thank you for contact.
The mighty Celsius W570, Celsius W570 Power and Celsius W570 Power+ were designed and tested to be used with the following PSUs accordingly:
Celsius W570 (D3517):
Max. surge output 280W
Power supply efficiency:
- at 230V, 10% load: 75%
- at 230V, 20% load: 85%
- at 230V, 50% load: 88%
-at 230V, 100% load: 85%
Material number: 34052155
Part number: S26113-E590-V70-1
Description: PSU 250W 85+
Celsius W570 Power (D3517):
Max. surge output 400W
Power supply efficiency:
- at 230V, 10% load: 80%
- at 230V, 20% load: 90%
- at 230V, 50% load: 92%
-at 230V, 100% load: 89%
1x graphic power rail (additional 6pin connector for graphics card)
Material number: 38049288
Part number: S26113-E594-V50-1
Description: PSU 360W 90+
Celsius W570 Power+ (D3517):
Max. surge output 400W
Power supply efficiency:
- at 230V, 10% load: 80%
- at 230V, 20% load: 90%
- at 230V, 50% load: 92%
-at 230V, 100% load: 89%
1x graphic power rail (additional 6pin connector for graphics card)
Material number: 38049288
Part number: S26113-E594-V50-1
Description: PSU 360W 90+
Other PSUs where not tested and we can't provide you any not-tested solution.
Best regards,
Forum Support Fujitsu