Fujitsu HDD Diagnostic Tool - HDD recognition failed

FibreCAT SX, FibreCAT NX, FibreCAT TX, ETERNUS DX, ETERNUS LT, ETERNUS CS

Moderator: ETERNUS Moderator Team

felisse.courage
Posts: 3
Joined: Tue Mar 17, 2009 14:59
Product(s): Amilp Pi 3540

Fujitsu HDD Diagnostic Tool - HDD recognition failed

Postby felisse.courage » Tue Oct 06, 2009 14:36

he everybody!

problem with Fujitsu HDD
I have a MSI px600 notebook, which worked fine so far. now, vista does not boot properly anymore. it gets stuck in the loading bar. no windows boot mode would work, no bios reset helped, no RAM is defect. chkdsk shows me a few errors. so I wanted to check my HDD, which is a Fujitsu MHZ2320BH G2, with the Fujitsu HDD Diagnostic Tool for DOS. I did that with the help of a bootable usb-stick.
the tool runs but is not able to detect the HDD -> see screenshot

BIOS detects it, even windows begins to load a bit. so how can that be?
thanks for your help folks!
felix

edit: I just noticed that the tool's name says something about ATA, but nothing about SATA. this might be the reason?
so where can I get the right tool from?

Return to “Speicherlösungen”

Who is online

Users browsing this forum: No registered users and 1 guest