[N500] Device zerlegen

Pocket LOOX

Moderator: ModTeam

t.p.z
Posts: 42
Joined: Fri Jun 09, 2006 13:10

[N500] Device zerlegen

Postby t.p.z » Fri Aug 08, 2008 18:39

Kann man einen Loox N500 ohne weiteres, d.h. mittels des entsprechendem Torx- Schraubenziehers öffnen und das Gehäuse tauschen?
Hat das schon mal jemand gemacht oder gibt es Bilder davon?

djfoxi2008
Posts: 1
Joined: Fri Aug 08, 2008 18:56
Product(s): N560

Re: [N500] Device zerlegen

Postby djfoxi2008 » Fri Aug 08, 2008 18:58


t.p.z
Posts: 42
Joined: Fri Jun 09, 2006 13:10

Re: [N500] Device zerlegen

Postby t.p.z » Fri Aug 08, 2008 19:04

Vielen Dank, das ging aber schnell. Hab ziemlich lange erfolglos danach gesucht.
Das neue Gehäuse ist nämlich schon bestellt.

ndhuy
Posts: 1
Joined: Sun Sep 21, 2008 6:19
Product(s): N500

Re: [N500] Device zerlegen

Postby ndhuy » Sun Sep 21, 2008 6:27

Dear all,
could you please help me! After upgrade Windows CE and GPS firmware, I can not use Oziexplorer. The GPS locator still run but when I use Oziexplorer it can not fix signal from satellite although I put my handheld outside nearly 1 hour. I already install qiuck GPS and connect to network for receiving data.

Thank and best regards

htquax
Posts: 21
Joined: Tue Jul 01, 2008 18:49
Product(s): Loox N560

Re: [N500] Device zerlegen

Postby htquax » Sun Sep 21, 2008 20:26

Hi mate,

if I understand you right, then you had already some GPS connection with the GPS locator!?
If yes, then you have to check the com port at Oziexplorer
in that way:
Start Ozi.......................
goto the tab >File<
select >configuration<
select NMEA(GPS)

Check the Baud it should be 57600
Check the Port it should be COM4

That's it!
Okey?

If just no GPS program works, then you have to check the >connection< adjustments!

good luck

HTQ


Return to “Handhelds (PDA)”

Who is online

Users browsing this forum: No registered users and 1 guest