TX2560 M2 with D3262-A100 adapter

PRIMERGY, SPARC Enterprise Server, PRIMEFLEX, PRIMEPower, BS2000

Moderator: ModTeam

vladkobg
Posts: 5
Joined: Sat Nov 12, 2022 21:28
Product(s): TX2560 M2

TX2560 M2 with D3262-A100 adapter

Postby vladkobg » Mon Nov 14, 2022 12:19

Hello guys,

I have a TX2560 M2 Primergy server and the goal is to connect 4 NVMe U.2 SSDs to the system using the following adapter - S26361-D3262-A100 (PCIESW_X16_4X4). I have already bought the adapter, the necessary cables (Mini SAS HD to U.2) and two Samsung PM9A3 2.5" U.2 disks. I am placing the disks each in its own caddy at the very top 3,5" bay. I take power directly from one of the backplanes via this cable T26139-Y3930-V601(LTG SATA FULL PWR) and use this splitter (https://www.delock.com/produkt/60105/merkmale.html) to provide power to 2 drives. When I connect everything as described above and boot the system, the drives do not show up in Windows. I measured the volts coming from the backplane power port and it turns out that it provides 5V and 12V which are ok to power conventional HDDs, but it turns out that the NVMe disks require 3.3V along with 12V. Where can I get these 3.3Volts from and be able to power my disks?

Thank you very much for the help in advance,

Regards,

Vladimir

Return to “Server Produkte”

Who is online

Users browsing this forum: No registered users and 1 guest