RX2540 M4 Bild stockt, stutter, slow performance

PRIMERGY, SPARC Enterprise Server, PRIMEFLEX, PRIMEPower, BS2000

Moderator: ModTeam

swatch
Posts: 2
Joined: Wed Sep 18, 2019 15:10
Product(s): Primergy RX2540 M4

RX2540 M4 Bild stockt, stutter, slow performance

Postby swatch » Thu Sep 19, 2019 15:07

Hallo zusammen,
wir haben einen RX2540 M4 mit 2x XEON Silver 4110 8C und 200GB Ram bekommen.
Alle Teile sind von Fujitsu zertifiziert und bei einem namhaften Lieferanten im B2B Bereich bestellt.
Verbaut sind 3x Micron 250Gb SSDs und 9 Samsung 1TB SSDs.
ebenfalls vom lieferanten geliefert.
Onboard VGA ist die uralte Matrox G200e.
Vorab : Es gibt keine Fehlermeldungen aus dem IRMC. Es war sogar ein Fujitsu Partner techniker bei und und hat die die Kiste geprüft und das Systemboard getauscht.

Fehler: Der Bildaufbau ruckelt total. Bei einer Auflösung von 1600x1200 oder 1080p an einem normalen TFT lassen sich die Fenster kaum bewegen. Bildaufbau im Browser stockend.
Getestet wurde:
Neues Systemboard
Verschiedene Monitore, Kabel, Auflösungen. Ruckeln im Remote Desktop ebenfalls.
Verschiedene Software. Server 2019,2016 mit und ohne ServerView Installer.
Installiert wurde über Server view mit einer aktuellen Server ISO auf einem USB Stick, welche er sich im Server View Manager bei Deployment dann gezogen hat.
Komplette Treiber über Fujitsu Monitor Update.
Kreuztest Ram, Cpu, 1x CPU Betrieb, 1x Ram.
Betrieb ohne OPS Panel ohne Pcie Karten
Installation des OS auf einer SSD am ODD Sata port ohne Raid Karte.

Fujitsu lässt uns ziemlich hängen und ein neuer Server würde ca. 3 Wochen dauern.

habt ihr noch Ideen?

Vielen Dank :)

Auf Englisch:

Hello everybody,
we got a RX2540 M4 with 2x XEON Silver 4110 8C and 200GB Ram.
All parts are certified by Fujitsu and ordered from a reputable supplier in the B2B area.
Installed are 3x Micron 250Gb SSDs and 9 Samsung 1TB SSDs.
also supplied by the supplier.
Onboard VGA is the age-old Matrox G200e.
First: There are no error messages from the IRMC. There was even a Fujitsu partner technician and they tested the box and swapped the system board.

Error: The picture buildup totally jerky. With a resolution of 1600x1200 or 1080p on a normal TFT, the windows can hardly be moved. Image construction in the browser halting.
Was tested:
New system board
Various monitors, cables, resolutions. Jerkiness in the remote desktop too.
Various software. Server 2019,2016 with and without ServerView installer.
It was installed via server view with a current server ISO on a USB stick, which he then pulled in the Server View Manager during deployment.
Complete drivers via Fujitsu Monitor Update.
Ram test, Cpu, 1x CPU operation, 1x Ram.
Operation without OPS Panel without Pcie cards
Installation of the OS on an SSD on the ODD Sata port without Raid card.

Fujitsu leaves us hanging and a new server would take about 3 weeks.

do you still have ideas?

Thank you very much :)

Return to “Server Produkte”

Who is online

Users browsing this forum: No registered users and 1 guest