Primergy RX300S6 BIOS Firmware failed

PRIMERGY, SPARC Enterprise Server, PRIMEFLEX, PRIMEPower, BS2000

Moderator: ModTeam

andylal
Posts: 1
Joined: Sun Sep 23, 2018 21:18
Product(s): PRIMERGY RX300S5
PRIMERGY RX300S6

Primergy RX300S6 BIOS Firmware failed

Postby andylal » Mon Sep 24, 2018 14:19

I would appreciate your support related to following issue:

System Type: PRIMERGY RX300 S6
Chassis Type: RX300S6R3

Following installation of VMware-ESXi-5.5.update03-4722766-Fujitsu-v334-1 ISO image, during reboot cycle, BIOS firmware went corrupted

On iRMC S2 Web Server under Sensors -> Component Status, I got following alarm

47 BIOS System Firmware (BIOS/EFI) 0 No Failed No

Enabled BIOS Recovery Flash, under Server Management but the recovery expects a Floppy Disk with BIOS to be updated.

Image

Image
The recovery BIOS expects ONLY a Floppy image with BIOS firmware

There is no BIOS floppy image available to download for D2619-N BIOS from Support site.

Even if I download all BIOS files and try to make a floppy image for BIOS, the image size exceeds 1.44MB, (for 65KB) therefore is impossible to recover a corrupted D2619-N BIOS regardless if the functionality is said to be available.

Image

Your feedback would be highly appreciated
Attachments
unnamed (1).jpg
unnamed (1).jpg (13.24 KiB) Viewed 1810 times
unnamed (2).jpg
unnamed (2).jpg (29.91 KiB) Viewed 1810 times
unnamed.jpg
unnamed.jpg (5.47 KiB) Viewed 1810 times

me@work
Posts: 938
Joined: Thu Jun 22, 2006 15:32
Product(s): Scaleo Pi2662, Primergy

Re: Primergy RX300S6 BIOS Firmware failed

Postby me@work » Mon Sep 24, 2018 16:13

Sorry, I don't have a proven solution for you, but two tipps as options
- Remove the p6_* files from the floppy image, as these may be applied later as well
- Start with an older BIOS version, because at least the download of 1.09 appears to be about 100K smaller

Hope it helps, anyway...

Plus: There's an English language section available on this forum, too.


Return to “Server Produkte”

Who is online

Users browsing this forum: No registered users and 2 guests