Problem with CONNECTBIRD Wireless LAN USB

I have a Scaleo 800xi Pentium 4 3.06GHz HT that talks to a Gigaset SE 105 dsl/cable router via CONNECTBIRD Wireless LAN USB adapter. When hyperthreading (HT) is turned on, the CONNECTBIRD driver hangs the system and only a reboot helps. So I'm now running effectively at half steam with HT turned off. Does anybody (in particular Fujitsu-Siemens if they come across this post) have a remedy? The driver version is 1.7.29.0, the date is 20.10.2001. Is any later version available and, if yes, where?<P>Thank you in advance<P>branko

[Juggernaut]

Well HT off is not half steam... but anyway I hope you get that issue solved. Does this help:<BR> <A HREF="http://www.fsc-pc.de/support/Description.asp?drvid=24958" TARGET=_blank>http://www.fsc-pc.de/support/Description.asp?drvid=24958</A> <P>

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Juggernaut:<BR><B>Well HT off is not half steam... but anyway I hope you get that issue solved. Does this help:<BR> <A HREF="http://www.fsc-pc.de/support/Description.asp?drvid=24958" TARGET=_blank>http://www.fsc-pc.de/support/Description.asp?drvid=24958</A> <P></B><HR></BLOCKQUOTE><P>Thanks, I've tried that, but the problem persists, only MTBF is much, much longer. Interestingly enough, this version is supplied on the original CD-ROM and it effectively gets installed in the first installation step (when only drivers are installed). When the Setup utility is installed in the second step, however, the installer asks whether the driver should be overwritten, and if one answers Yes Iwhich I obviously did) the wrong version gets installed over the less wrong one.<P>So I keep running on, OK, three-quarter steam.