system board d970 pinout problems

[andreas26]

hi<P><BR>i know this is quite an old board ... but its real smp and i want to test something . i fittet it in a atx case but the inner cableing is a bit difficult and the manual doesn't giv any hints on this <P>my problem are the pinouts (onboard) for the front panel 1 & 2 connector. <BR>which pin is for what (leds,reset,etc.)????? can anyone post a schema or something like this ????<P>best regards andreas

[Data]

Hi there.<P>Have a look on the following URL: <A HREF="http://www.fsc-pc.de/support/softwareassist_e.asp" TARGET=_blank>http://www.fsc-pc.de/support/softwareassist_e.asp</A> <P>Search for "D970" in the "Fulltextsearch" box, there you'll find the "Systemboard D970 Technical Manual"<P>Hope this helps.<P>Ciao<BR>Data

[andreas26]

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Data:<BR><B>Hi there.<P>Have a look on the following URL: <A HREF="http://www.fsc-pc.de/support/softwareassist_e.asp" TARGET=_blank>http://www.fsc-pc.de/support/softwareassist_e.asp</A> <P>Search for "D970" in the "Fulltextsearch" box, there you'll find the "Systemboard D970 Technical Manual"<P>Hope this helps.<P>Ciao<BR>Data</B><HR></BLOCKQUOTE><P>thanks for this tip ... but there are still no hints on my problem ...<P>they just tell me that 7 is for control panel1 and 8 for control panel2. i need the exakt pinout of both cause i dont know where the reset switch or the leds have to be connected to.<P>i dont want to try this out because on many pins is a voltage of ~5V.<P><BR>best regard andreas

Front Panel Connector 1:<P>2 STANDBY LED +<BR>4 POWER LED +<BR>6 GND<BR>7 KEYLOCK<BR>8 GND<BR>10 HD LED +<BR>11 HD LED -<BR>12 HD LED +<BR>13 HD LED -<P>Front Panel Connector 2:<P>1 RESET<BR>2 GND<BR>4 TURBO LED +<BR>5 TURBO LED -<BR>7 TURBO SWITCH (connect to GND to slow the system down)<BR>8 GND<BR>