Postby Andree » Fri Nov 12, 2004 21:14
Hello everybody,<P>i purchased an D1031 from a Primergy 470.<BR>Problem is that the second Processor is not running (at boot up only 1 CPU installed is shown)<P>Motherboard is 26361-D1031-A22-GS5, VRM from Celestica with part number 073-20770-01<BR>two identical CPU's PIII 700 Coppermine SL3XM and four Micron 128MB registered ECC RAM Modules. <P>What i have done until now successfully:<BR>1. BIOS update to version 4.06 1.08.1031<BR>2. BIOS microcode update patch<BR>3. Tried every CPU in SLOT 1 and 2 seperatly (System is running well with only one CPU in Slot2 and VRM)<P>Is there any trick to get the second CPU operating.<P>Thanks for help<P>[This message has been edited by Andree (edited 13 November 2004).]<p>[This message has been edited by Andree (edited 13 November 2004).]