Where can I download the latest ServerStart CD?

[Gunsten]

Hi, I just installed w2k on a Primergy F200 using ServerStart V 4.21.<P>Where can I find the latest version (V4.24.02)? Is it availible for download?<P>The problem is that I have run serverstart in both guided mode and Expert mode, and w2k gives blue screen everytime it boths (After about a minute). I tryed to flash the BIOS but it doesn't help.<P>Has anyone else had this problem with F200? What can I do about it?<P>

[ToDa]

Hi Gunsten,<P>the ServerStart CD is not available as full CD download. This is an license problem with the mini-NT from Microsoft. There is only an online version to get latest FW, BIOS, ...<BR>You can find it here: <A HREF="http://www.fsc-pc.de/server/serverstart/en/default_web.htm" TARGET=_blank>http://www.fsc-pc.de/server/serverstart/en/default_web.htm</A> <P>Did you update your BIOS or only "try" to update your BIOS [img]/talk2/ubb-files/smile.gif[/img]<BR>What is your current version, the latest is<BR>V4.06 R1.02.<P>Can you provide more information about the Bluescreen (Error Code, Filename, ...)?<P>Did you install additional hardware components that are not supported by the ServerStart CD ???<P>Please can you give me an overview of your hardware configuration ???<P>Try to boot the system with the minimal hardware components, only with harddisk controller ...<P>Please let me know if it was helpful.<P>best regards,<BR>ToDa<BR>

[Gunsten]

Hi, thanks for the fast reply.<P>I get the following error:<BR>"A driver has corrupted the Memory Managment system PTEs.<P>*** Address 8046A03E at 80400000, DateStamp 384d5a76 - ntoskrnl.exe"<P><BR>I have not installed any, non-supported HardWare. I just unpacked it, plugged in and run the ServerStart CD included. But I have a S30 external raid connected, it came in the package. And I couldn't find any updates for that in: <A HREF="http://www.fsc-pc.de/support/softwareassist_e.asp" TARGET=_blank>http://www.fsc-pc.de/support/softwareassist_e.asp</A> <P>And I have BIOS V4.06 R1.02<P>Please let me know if there are any drivers I need to install.<P>Regards, Ronnie<P>

[ToDa]

Tell me what kind of harddisk/RAID controller do you use.<P>On which way do you connect the S30 to the F200, with the onboard U160 LVD controller or with an other SCSI controller ???<BR>Did this controller recognize the harddisks placed in the S30 ???<P>Did you try to start up without S30 ???<P>... ToDa<BR>

[Gunsten]

Well I've connected the S30 with "RAID-Ctrl,Mylex,4xU160 SCSI,BBU,128MB PCI-Ctrl".<P>And iv'e set up the Raid in Tools - Raid Tools on the ServerStart CD.<P>On the S30 there are 7 disks, so ive set up 6 of them with raid 5. Using the last as hotSpare. And the 2 internal disk as mirroring. They are both connected to U160. So yes, the controller found the disks.<P>And then I created the neccesarry partionions as instructed in the Guide on ServerStart. So there shouldn't be any problem there.<P>Ive tryed rebooting with S30 disconnected (Same problem). <BR>Do you think I need to re-install, and have the S30 disconnected? Could that help?<P>//R.

[ToDa]

I´m not really sure and I can give no guarantee that a new installation of W2k can solve the problem.<BR>But I would give them a try, I think there is no other way to find a solution [img]/talk2/ubb-files/frown.gif[/img]<P>I can not believe that FSC deliver a Primergy with a CD that are not released for use with this system !?<P>Another way is to contact FSC to find out if there are any restrictions with this ServerStart CD in combination with the S30.<BR>Here you´ll find a helpdesk contact list: <A HREF="http://service.fujitsu-siemens.com/support/helpdesk/" TARGET=_blank>http://service.fujitsu-siemens.com/support/helpdesk/</A> <P>Do you try to boot W2k with the F8 option in the "Protected Mode" ???<BR>Here you have the chance to find out which driver is the problem by select them separately on startup.<P>... ToDa<BR>