How to Configure RAID1

PRIMERGY, PRIMEPower

Moderator: ModTeam

risingflight
Posts: 12
Joined: Wed Dec 01, 2010 11:26
Product(s): Fujitsu servers

How to Configure RAID1

Postby risingflight » Tue Oct 23, 2012 20:51

Hello Everyone

I have Fujitsu Server with 2 SATA hard drives of 500gb , i wanna configure RAID1
please guide me how to configure, i am using Fujitsu Server View 10.11

I went to customized installation, In RAID Manager i can see 2 hard drives but how to create RAID 1 and add to it.
i am confused.

or guide me how to configure through megaraid.

me@work
Posts: 1024
Joined: Thu Jun 22, 2006 15:32
Product(s): Scaleo Pi2662, Primergy

Re: How to Configure RAID1

Postby me@work » Wed Oct 24, 2012 7:56

"...Fujitsu server with 2 SATA drives..." Aha.
Well, not too much information to feed to the magician's glass ball...

First, you need to determine what kind of controller you actually run your drives on. MegaRAID SAS, MegaRAID SATA, perhaps setting in system BIOS, ...
Then, you might want to have a look at the accompanying ServerBooks DVD, where you will find manuals for the SV-RAID application on your SV Installation Manager DVD, and for the MegaRAID BIOS configuration tools as well.
If you don't have the ServerBooks DVD, the manuals also are available on the Manual Server.


Return to “Server Products”

Who is online

Users browsing this forum: No registered users and 1 guest