rx300 s7 cannot access to BIOS

PRIMERGY, PRIMEPower

Moderator: ModTeam

babek
Posts: 33
Joined: Thu Dec 13, 2007 7:18

rx300 s7 cannot access to BIOS

Postby babek » Mon Oct 01, 2012 14:07

hi..

i have made some changes in BIOS of this server. and now i am unable to enter BIOS to reset the settings as default. I opened the server's case took off the bios battery and reset it. but no good result. i see black screen only in the right down side of the screen A9. And all the hard disks on the server are blinking.

thank you.

me@work
Posts: 1024
Joined: Thu Jun 22, 2006 15:32
Product(s): Scaleo Pi2662, Primergy

Re: rx300 s7 cannot access to BIOS

Postby me@work » Mon Oct 01, 2012 14:28

If you can't get into BIOS after some time of waiting, or if you reset the box and continuously hold down several keys on the keyboard,
- open the box of the server
- see the large sticker on top cover inside
- find jumper JP1 next to the PCI-e slots
- start BIOS recovery
- don't use the settings again that led to the current state
- consider following my advice I gave in your other posting. I.e. get professional on-site help.

babek
Posts: 33
Joined: Thu Dec 13, 2007 7:18

Re: rx300 s7 cannot access to BIOS

Postby babek » Tue Oct 02, 2012 5:03

thank you. i could reset the bios settings as you told me. then i noticed that only when i enable UEFI mode on the bios. the server freezes. and i cannot get the bios settings to change. only when resetting it works. do not get me wrong, but this server is new for me and seems i am not well know it. so troubles are appearing.


Return to “Server Products”

Who is online

Users browsing this forum: No registered users and 1 guest