PRIMERGY ECONEL 100 S2 - Cannot write to irmc storage

PRIMERGY, PRIMEPower

Moderator: ModTeam

Mohamed.el3laidy
Posts: 3
Joined: Sun Jul 29, 2012 12:09
Product(s): primergy econel s100

PRIMERGY ECONEL 100 S2 - Cannot write to irmc storage

Postby Mohamed.el3laidy » Wed Aug 01, 2012 16:41

Hello

I have a Primergy Econel 100 s2 when I try to initialize it throw the "Server Software Suite" to install Windows Server 2008 Standard Edition x64 , It shows the following " Cannot write to iRMC Storage "
I tried another CD for windows server 2008 but Problem still the same

what should i do ?

Server View Suite DVD Version 10.09.04

Davie
Posts: 567
Joined: Fri Jun 10, 2005 0:01
Product(s): PRIMERGY, ServerView
Location: UK

Re: PRIMERGY ECONEL 100 S2 - Cannot write to irmc storage

Postby Davie » Thu Aug 02, 2012 7:12

The Econel 100 S2 doesn't have local iRMC storage, so what the message is trying to tell you is that you need something like a sloppy or USB pen drive for ServerStart to store some temporary backup status files.

ServerStart requires a few reboots to install an OS and obviously after a reboot it would have "forgotten" where it had got to and so would start again. By providing some non-volatile memory, it can store checkpoint files so that it knows where in the sequence it is

If you put in a USB stick before booting the server, and then on the first or second screen, select the USB device as your backup status media, all should be OK (though you may still get the message, which is meant to be informational rather than an error message)

Mohamed.el3laidy
Posts: 3
Joined: Sun Jul 29, 2012 12:09
Product(s): primergy econel s100

Re: PRIMERGY ECONEL 100 S2 - Cannot write to irmc storage

Postby Mohamed.el3laidy » Thu Aug 02, 2012 17:21

Thanks for rapid reply

I used the USB drive for back up and after first reboot i got error message '' [OsInstal] [System] SVIM configuration file not found ''

What should i do ?




Thanks in advance

Mohamed.el3laidy
Posts: 3
Joined: Sun Jul 29, 2012 12:09
Product(s): primergy econel s100

Re: PRIMERGY ECONEL 100 S2 - Cannot write to irmc storage

Postby Mohamed.el3laidy » Mon Aug 06, 2012 9:12

Any solution for this problem ?


Return to “Server Products”

Who is online

Users browsing this forum: No registered users and 1 guest