[BX600] MMB Firmware Update

PRIMERGY, PRIMEPower

Moderator: ModTeam

Ermes_JM
Posts: 1
Joined: Mon Jan 12, 2009 19:04
Product(s): BX600

[BX600] MMB Firmware Update

Postby Ermes_JM » Mon Jan 12, 2009 19:11

Hello.

I'm trying to install two BX620 S4 on a BX600 S2 chassis. This blade servers requires a firmware update: current firmware is 1.60 and minimum it needs 1.73. I have two MMB, one master and another slave.

So I've been downloaded the latest firmware (2.40) and a TFTP server called Pumpkin.

When I go to management website and go to Firmware Update - Management Console I fill this fields:

TFTP Server: 192.168.1.5 (My IP Address)
Agent: 192.168.1.11 (the current address for MMB is 192.168.1.10). I think this is for don't lost connectivity with the slave MMB.
File: mgmg.bin In help I understand that the chassis copy the 2.xjumper****.bin file, so I put mgmt.bin

The connection Is ok: I push to "Reboot Management ......" and connects to my TFTP, but passed 30 seconds, It aborts the connection.

Can you say me how I must put this files on the TFTP root dir?

Thanks in advance

naymh
Posts: 1
Joined: Wed Jan 14, 2009 8:40
Product(s): PRIMERGY

Re: BX600 MMB Firmware Update

Postby naymh » Wed Jan 14, 2009 8:58

Hi Ermes_JM,

Please refer the installation description from ServiceBlletin. You can also get it from firmware download description.

========================================================
Installation description:
See ServiceBulletin SB-PRI-08029

You have 1.x at the MMB you want to update:
Update from 1.7x Firmware has to be done by flashing with file 2.x.jumper.02.bin only.
This firmware
1) automatically restarts the MMB and
2) automatically loads the second file mgmt.bin.
(both files `2.x.jumper.02.bin` and `mgmt.bin` must be put in the directory where the Pumpkin tftp offers the files from !)
(The actual 4MB version (e.g. v.2.18) has to be available/renamed with this filename `mgmt.bin` only !)

------------
You have 2.xx at the MMB you want to update:
Update from 2.xx Firmware has to be done by flashing with file mgmt.bin only.
==============================================

TFTP Server: 192.168.1.5 (My IP Address)
Agent: 192.168.1.11 (the current address for MMB is 192.168.1.10). I think this is for don't lost connectivity with the slave MMB.
>>>>>why you put 192.168.1.11 IP. (where do you get this IP?) I think it should be MMB IP address dot10.
File: mgmg.bin In help I understand that the chassis copy the 2.xjumper****.bin file, so I put mgmt.bin
>>>>>You should put 2.x.jumper.02.bin according to the installation description.


Please update me the outcome after you've tried.

Regards,
naymh

authorleon
Posts: 5
Joined: Mon Jul 23, 2012 20:40
Product(s): BX600

Re: [BX600] MMB Firmware Update

Postby authorleon » Tue Jul 24, 2012 11:18

Hello,

What was the outcome on this please?


Return to “Server Products”

Who is online

Users browsing this forum: No registered users and 1 guest