Hello,
I have a Scenic e600 D1534 Axxxx mainboard
technical specifications says CPU up to 3.4 GHz HT are supported.
But when i inserted 3.06 Ghz HT P4, the system didn't start
only fans on high speed, and nothing else!
I have upgraded BIOS and Microcode with last versions.
I searched in forum and found similar post for other mainboard:
"
I bought a cpu P4 3GHz 1MB 800MHz.
I assembled it in my motherboard but the cpu will not work with my d1562.
Only the fans are running when I power on the System.
Latest Bios and Microcode Update's are installed.
Does the motherboard hold the cpu I bought or do I have to use a P4 with 512 KB L2
thank you for a answer
Regards Jup
The D1562 can operate with the following CPU's:
D1562-A21: only Northwood CPU's up to 3,2GHz
D1562-C23: also Prescott CPU's, starting with 2.8GHz. You can use Prescotts with 2.8, 3.0, 3.2, 3.4GHz.
Regards
Thomas FSC"
I Guess Problem is with Prescott processor I have.
Is it right?
Regards,
Lubomir