I have a Scenic P300 and had to replace the D1561 motherboard because the original one failed.
I have installed a D1451 motherboard.
When I boot up it stops on ERROR: Patch for installed CPU not loaded. Please run the BIOS flash update diskette.
I've checked the Fujitsu-Siemens support pages and they refer to http://support.fujitsu-siemens.com/incl ... ortFAQ.asp
This says:
"Solution:
The Microcode of the CPU is not implemented in the BIOS. For Fujitsu Siemens Mainboards a special Flash Bios Microcode Patch Update Diskette is available. Please download a special file from website to create the Flash Bios Microcode Patch Update Diskette. Please find more information in the enclosure: wp_microcode_update_en.pdf "
But the link here only takes you back to the first step and infers you run this via Windows using Desk View ?
I need to get a working system again and was hoping to flash the BIOS via DOS first.
Please can anyone give me the steps to do this please ?
Thanks
Alan