How to enter BIOS as Supervisor? Celsius H270

Moderator: ModTeam

fsj_user
Posts: 3
Joined: Sat Jan 08, 2011 15:29
Product(s): Celsius H270 MS Vista

How to enter BIOS as Supervisor? Celsius H270

Postby fsj_user » Mon Jan 10, 2011 15:41

After BIOS update from Version 1.11 to 1.13 there is a USER Password set.
SUPERVISOR password is not set/clear.

Before updating, there were no passwords set.
Is there a standard USER password?
How to enter the BIOS as SUPERVISOR?

Actually, if pressing F2 while starting up, BIOS is entered in USER mode.

Thank you and best regards.

User avatar
sabrex
Posts: 1145
Joined: Thu Jun 05, 2003 0:01
Product(s): Various
Location: England
Contact:

Re: How to enter BIOS as Supervisor? Celsius H270

Postby sabrex » Mon Jan 10, 2011 16:16

The only way you can remove a bios password is by calling your local helpdesk and logging a call they will then instruct you as to the procedures they have in place.

fsj_user
Posts: 3
Joined: Sat Jan 08, 2011 15:29
Product(s): Celsius H270 MS Vista

Re: How to enter BIOS as Supervisor? Celsius H270

Postby fsj_user » Mon Jan 10, 2011 17:18

How to enter BIOS as SUPERVISOR instead of USER?
How to switch/choose between SUPERVISOR or USER while starting the BIOS SETUP UTILITY?


Best regards.

User avatar
sabrex
Posts: 1145
Joined: Thu Jun 05, 2003 0:01
Product(s): Various
Location: England
Contact:

Re: How to enter BIOS as Supervisor? Celsius H270

Postby sabrex » Tue Jan 11, 2011 10:53

In answer to your query
http://support.ts.fujitsu.com/com/support/manuals.html

see: Professional Notebook, Operating Manual (en) - CELSIUS Mobile H270
open, see:
Security functions
also Bios setup explained

Once read I refer to response about theres no password update bios then there suddenly was a password. The only way to remove it above.

From the manual it does say you can not have a USER password until you have set a SUPERVISOR password.


Return to “CELSIUS Mobile Workstations”

Who is online

Users browsing this forum: No registered users and 1 guest