R 670-2 Raid Mirror question

Moderator: ModTeam

erics3000
Posts: 1
Joined: Fri Feb 05, 2010 19:25
Product(s): Siemens Fujitsu. Fujits Primergy TX200S3, etc

R 670-2 Raid Mirror question

Postby erics3000 » Fri Feb 24, 2012 16:15

I have a 670r box that had 2 drive mirrored with the internal LSI Corp COnfig Utility. It used the drive 0 for our c and that should be mirrored on drive 1 and than drive 2 has d e and f and that is mirrored on drive 3. I lost the array but not my data form moving in and out the drives to switch hardware and wanted to get the mirror set back up.

In LSI creating a array when I mark to with the m for migratiion disk 0 goes from no in radi box to yes but not disk 1 it does say it will do this automaticly so whne i go to disk 2 it does not give me a option of m it just say data was found on the selected disk this data will be lost.. now is that talking about disk 2 or disk 3 that id uses automaticly for the mirror?

Thank you

Return to “CELSIUS Workstations”

Who is online

Users browsing this forum: No registered users and 2 guests