I have XA3530 model with 2 hard drive running in RAID0. Now i bought SSD drive Corsair Force 3 64GB. I disable RAID and set AHCI mode in BIOS. When I used whole SSD drive on SATA2 port (close to cpu - common cover) or use SSD on any SATA port combined with classic hard drive on another SATA port then notebook's POST is very long. It takes about 30 seconds. Blue progress bar stops (1cm before the end) and notebook do nothing. After that, normally boots.
When I change mode to IDE Legacy - it's alright and POST takes about 3 seconds.
I have latest BIOS installed and latest firmware in SSD. What do you think? It's notebook BIOS failure or SSD drive fault?
THANKS.