Scaleo p - urgent help required

SCALEO E, SCALEO H, SCALEO X, SCALEO L, SCALEO P

Moderator: ModTeam

pcbuzz
Posts: 32
Joined: Thu Mar 10, 2011 19:29
Product(s): Fujitsu Siemens Scaleo P

Scaleo p - urgent help required

Postby pcbuzz » Sun Mar 13, 2011 23:08

Hello!

I have a scaleo p and it got a virus. Now it turns on but doesnt show on screen, has 1 continuos tone and the HDD light (the one which shows the hard drive is being accesed) doesnt turn on, there should be a blue ring around the power button but there is a small orange one. I tried to put the recovery disk in but that didnt do anything? It managed to turn on a few days ago, i was looking at files and after 5 minutes restarted and didnt start up again properly.

What should i do to make it turn on??

Thanks for any help!

pcbuzz
Posts: 32
Joined: Thu Mar 10, 2011 19:29
Product(s): Fujitsu Siemens Scaleo P

Re: Scaleo p - urgent help required

Postby pcbuzz » Fri Mar 18, 2011 23:37

ANyonee????????????????????????????

pcbuzz
Posts: 32
Joined: Thu Mar 10, 2011 19:29
Product(s): Fujitsu Siemens Scaleo P

Re: Scaleo p - urgent help required

Postby pcbuzz » Sun Mar 20, 2011 13:27

doesnt anyone want to help????/?????/?????

Feargal
Posts: 7
Joined: Tue Mar 22, 2011 20:14
Product(s): Celsius, R630, V830 & R640
Location: UK

Re: Scaleo p - urgent help required

Postby Feargal » Wed Mar 23, 2011 22:46

I'm new here but I'll try to help. Can you clarify - you had a virus. Has it been removed & if so, how. You mention a continuos tone, When does this happen ?? do you get any messages on the screen ? does the screen actually come on ( light goes green ? ). Need a lot more ( clearer ) info to help, but based on my interpretation of your post you may have a drive failure.

pcbuzz
Posts: 32
Joined: Thu Mar 10, 2011 19:29
Product(s): Fujitsu Siemens Scaleo P

Re: Scaleo p - urgent help required

Postby pcbuzz » Tue Mar 29, 2011 21:05

thanks,
there is no pic on screen, no light , nothing, it wont turn on, or even boot so i cant remove the virus

Feargal
Posts: 7
Joined: Tue Mar 22, 2011 20:14
Product(s): Celsius, R630, V830 & R640
Location: UK

Re: Scaleo p - urgent help required

Postby Feargal » Wed Apr 06, 2011 22:52

Hi, Sorry for delay.
Does the machine make any sound when you try to switch it on. Fan noise ? anything ?

pcbuzz
Posts: 32
Joined: Thu Mar 10, 2011 19:29
Product(s): Fujitsu Siemens Scaleo P

Re: Scaleo p - urgent help required

Postby pcbuzz » Sat Apr 16, 2011 13:01

there is fan noise.

Feargal
Posts: 7
Joined: Tue Mar 22, 2011 20:14
Product(s): Celsius, R630, V830 & R640
Location: UK

Re: Scaleo p - urgent help required

Postby Feargal » Mon May 02, 2011 16:20

Again, sorry for the delay.

You appear to be suffering some level of component failure.

With the system unplugged, disconnect the hard drive ( power & data cables ). re-plug the machine & power it. Then see if you get more than fan noise i.e. beeps or screen display.

If you do, then the inference is drive failure & you will need to get it replaced or repaired. On the other-hand, if you still get no sounds other than fan noise then it's time for a trip to your local repair shop. There would be too many variables to perform a remote diagnosis.

Good luck. Let me know


Return to “SCALEO”

Who is online

Users browsing this forum: No registered users and 1 guest