Hello,
I have a customer who needs to connect to a SAN DX80 S2 a brand new server RX2540 M5.
(DIRECT ATTACHED FC LINK between SAN and server)
The SAN has FC 8Gb/s channel adapter connections and last FW V10L64-3000
The customer has bought 2 FC Card FTS branded Emulex LPe31000 (S26361-F5596-L501)
On the support matrix of the DX S2 series this FC card is not listed because too brand new products.
The support matrix only recognizes as supported the models LPE1600x-LPE1200x series!
The 2 FC Card are running last FW 12.6.182.8
The SAN and the 2 FC cards do not bring UP the link together
We have tested many combination:
- BOOT FROM SAN (not needed) disabled (default) OR enabled
- LINK speed set as AUTOMATIC (default) OR FIXED 8Gb
Anyway, if possible, does anyone tested this combination as running?
Regards from Italy,
Andrea