FibreCAT SX, FibreCAT NX, FibreCAT TX, ETERNUS DX, ETERNUS LT, ETERNUS CS
Moderator: ETERNUS Moderator Team
- Posts: 4
- Joined: Wed Aug 08, 2012 11:14
- Product(s): Eternus, Prymergy, Esprimo, Lifebook
I have and old Eternus DX 60 S2 System with two SAS 15k 600 GB 3.5" failed drives (Seagate ST3600057SS@GF0D). I only use this system for testing purpouses, so I don't want to spent too much money here.
I have found in Internet two second hand HDDs used into a Eternus DX 80 System. All is the same but the firmware verison. The DX 80 HDDs are GF0A version instead of GF0D.
I know that Fujitsu Eternus systems need special HDD's firmware versions, but taking into account that the two versions works in Eternus systems, I ask myself if the DX 80's HDDs could be used into the DX 60. Anyone knows?
Thanks in advance.
- Posts: 2
- Joined: Mon Jun 24, 2019 18:55
- Product(s): Eternus DX60
Were you able to resolve your issue? I just inherited an old ETERNUS DX60 S2 and one of the drives went bad. From what I understand you can not simply replace the drives with the same drives from Seagate as they have a special firmware one them and I am having troubles finding the drives through regular channels.
Return to “Storage solutions”
Who is online
Users browsing this forum: No registered users and 1 guest