Fibercat SX80 FC hangs when plug-in fiber cord.

FibreCAT SX, FibreCAT NX, FibreCAT TX, ETERNUS DX, ETERNUS LT, ETERNUS CS

Moderator: ETERNUS Moderator Team

ekun
Posts: 10
Joined: Thu Oct 04, 2012 3:21
Product(s): Primergy RX300 s4 Primergy TX200

Fibercat SX80 FC hangs when plug-in fiber cord.

Postby ekun » Thu Oct 03, 2013 6:13

Hello.
The problem is - after loading with fiber cord disconnected Fibercat works well(at least web interface works and i see all volumes, only green led is active) but once i plug in Fiber cord it's starts to reboot or hangs. Both blue and orange leds on the controller became active.
Part of log below
Warning 2013-10-03 12:17:04
112
A9541 Host link down Chan0
Info 2013-10-03 12:17:04
71
A9540 Failover initiated, failover set B
Info 2013-10-03 12:17:04
188
A9539 Writeback cache disabled
Info 2013-10-03 12:17:04
111
A9538 Host link up Chan1: 1 Loop ID
Info 2013-10-03 12:17:04
111
A9537 Host link up Chan0: 1 Loop ID
Info 2013-10-03 12:17:04
77
A9536 Cache initialized for RAID controller A. WB data found
Info 2013-10-03 12:17:04
112
A9535 Host link down Chan1
Info 2013-10-03 12:17:04
112
A9534 Host link down Chan0
Info 2013-10-03 12:16:58
204
A9533 Hardware Flush p1=2h p2=32h
Info 2013-10-03 12:16:58
204
A9532 Hardware Flush p1=ah p2=30h
Info 2013-10-03 12:16:23
211
A9531 SAS Topology Change: Chan0, 45 elements, 1 expander, 1 native level, 0 partner levels, 7 device PHYs
Info 2013-10-03 12:16:19
204
A9530 Hardware Flush p1=ch p2=2fh
Warning 2013-10-03 12:16:17
84
A9529 Killed partner controller; reason=5 (Other not present)
Info 2013-10-03 12:16:17
190
A9528 Capacitor auto-writethrough trigger event: capacitor failed
Info 2013-10-03 12:16:12
56
A9527 Storage Controller booted. SC code version: J200P50
Info 2013-10-03 11:58:24
107
A9526 Critical Error: Fault Type: NMI p1: D000021 p2:2F248200 p3: 0000003 p4:0000000 CThr: CtSrv
Critical 2013-10-03 11:58:24
107
A9525 Critical Error: Fault Type: NMI p1: 02A01F5 p2:02A1399 p3: 02A0679 p4:0000000 CThr: CtSrv
Info 2013-10-03 11:58:16
111
A9524 Host link up Chan0: 3 Loop IDs, External Device(s)
Info 2013-10-03 11:58:16
111
A9523 Host link up Chan1: 2 Loop IDs
Info 2013-10-03 11:58:16
71
A9522 Failover completed, failover set B
Info 2013-10-03 11:58:15
77
A9521 Cache initialized for RAID controller B. WB data found
Info 2013-10-03 11:58:14
211
A9520 SAS Topology Change: Chan0, 45 elements, 1 expander, 1 native level, 0 partner levels, 7 device PHYs
Info 2013-10-03 11:58:10
114
A9519 Drive link down Chan0
Warning 2013-10-03 11:58:10
112
A9518 Host link down Chan1
Info 2013-10-03 11:58:09
71
A9517 Failover initiated, failover set B
Info 2013-10-03 11:58:09
111
A9516 Host link up Chan1: 1 Loop ID
Info 2013-10-03 11:58:09
77
A9515 Cache initialized for RAID controller A. WB data found
Info 2013-10-03 11:58:09
112
A9514 Host link down Chan1
Info 2013-10-03 11:58:09
112
A9513 Host link down Chan0
Info 2013-10-03 11:58:03
204
A9512 Hardware Flush p1=2h p2=32h
Info 2013-10-03 11:58:03
204
A9511 Hardware Flush p1=ah p2=30h
Info 2013-10-03 11:57:28
211
A9510 SAS Topology Change: Chan0, 45 elements, 1 expander, 1 native level, 0 partner levels, 7 device PHYs
Info 2013-10-03 11:57:24
204
A9509 Hardware Flush p1=ch p2=2fh
Warning 2013-10-03 11:57:22
84
A9508 Killed partner controller; reason=5 (Other not present)
Info 2013-10-03 11:57:16
56
A9507 Storage Controller booted. SC code version: J200P50
Critical 2013-10-03 11:56:59
65
A9506 Uncorrectable ECC error in buffer memory address 0xfffffff0 on bootup
Info 2013-10-03 11:56:57
56
A9505 Storage Controller booted. SC code version: J200P50
Info 2013-10-03 11:50:02
107
A9504 Critical Error: Fault Type: NMI p1: D000026 p2:2F248200 p3: 0000003 p4:0000000 CThr: CapiProc 1
Critical 2013-10-03 11:50:02
107
A9503 Critical Error: Fault Type: NMI p1: 02E09FC p2:017A667 p3: 01797E7 p4:018F0CA CThr: CapiProc 1
Info 2013-10-03 11:49:54
111
A9502 Host link up Chan0: 3 Loop IDs, External Device(s)
Info 2013-10-03 11:49:54
111
A9501 Host link up Chan1: 2 Loop IDs
Info 2013-10-03 11:49:54
71
A9500 Failover completed, failover set B
Info 2013-10-03 11:49:54
77
A9499 Cache initialized for RAID controller B. WB data found
Info 2013-10-03 11:49:52
211
A9498 SAS Topology Change: Chan0, 45 elements, 1 expander, 1 native level, 0 partner levels, 7 device PHYs
Info 2013-10-03 11:49:48
114
A9497 Drive link down Chan0
Warning 2013-10-03 11:49:48
112
A9496 Host link down Chan1
Info 2013-10-03 11:49:47
71
A9495 Failover initiated, failover set B
Info 2013-10-03 11:49:47
111
A9494 Host link up Chan1: 1 Loop ID
Info 2013-10-03 11:49:47
77
A9493 Cache initialized for RAID controller A. WB data found


Will appreciate any help.

ekun
Posts: 10
Joined: Thu Oct 04, 2012 3:21
Product(s): Primergy RX300 s4 Primergy TX200

Re: Fibercat SX80 FC hangs when plug-in fiber cord.

Postby ekun » Fri Oct 04, 2013 11:52

After analyzing SAN log support said
"Controller has a faulty memory DIMM:
Uncorrectable DDR ECC Error
Controller needs to be replaced."
I've found out that controller has 1 memory bank so-dimm ddr400 with ecc support.
Unfortunately it is very tough task to find such memory.
Can i somehow turn off cache using? Or disable ECC requirement on controller?
I have such memory bank but without ECC.

Will appreciate any help.


Return to “Storage solutions”

Who is online

Users browsing this forum: No registered users and 1 guest

cron