if i see in my zone admin i read in the corner of windows: Effetive zone config : default, all access
In my esxì i see only autoloader and i see the storage only if this is in direct connection with this storage.
My storage is DX60 and i have four controller
1: Direct with ESXì (CM1 Port 0) : work, i see the raid in the storage
2: Connect in the switch (CM1 port 1): don't work, if i disconnect the point 1, i can't see the storage
3: Direct with another ESXì (CM2 port 0) work, i see the raid
4: Connect in the switch (CM2 Port1) see point 2
I have connect in the switch another device (autoloader, FC controller file server ecc) end in the switch i see the device and in the esxì i see the autoloader.
The problem are, i can see my storage if i disconnect de direct link (point 1 and 3).
Why? I'm verry affreid for this, because i don't undestand how do the wrong
thanks for help and good day
P.S. My server is a 2 rx300 s4 : Is possibile enter in a bios of fc controoler? I try in phase of boot to press hold Cntr+E but nothing i can enter in the bios.