How to install LT20 SAS in Windows Server 2019

FibreCAT SX, FibreCAT NX, FibreCAT TX, ETERNUS DX, ETERNUS LT, ETERNUS CS

Moderator: ETERNUS Moderator Team

RR-Stefan
Posts: 1
Joined: Fri Jun 17, 2022 17:01
Product(s): LT20S2

How to install LT20 SAS in Windows Server 2019

Postby RR-Stefan » Mon Jun 20, 2022 11:31

Hello,
we have connected a LT20 via SAS to a Windows Server 2019 Server. Now the drive is displayed in the device manager and also in Veeam Backup. But our Problem is that Veeam could only use this drive not the hole tape library.

In some examples from other vendors i have seen that there is the drive and a medium changer device in the device manager. for the LT20 we don't have a medium changer entry.

what has to be done?

Thanks!

User avatar
Ask Fujitsu
Moderator
Posts: 724
Joined: Fri Aug 02, 2019 10:02
Product(s): n/a
Contact:

Re: How to install LT20 SAS in Windows Server 2019

Postby Ask Fujitsu » Fri Jun 24, 2022 14:00

Hello RR-Stefan,
Thank you for contacting Fujitsu.

We kindly advise you to follow these steps:
Library recolated » SAS controller not » incorrect SAS controller in the server » \storage

We hope this information helps and if you need any further assistance, don't hesitate to contact us.

Kind regards,
Forum Support Team


Return to “Storage solutions”

Who is online

Users browsing this forum: No registered users and 1 guest