[N560] with Memory Map

Pocket LOOX

Moderator: ModTeam

royshopland
Posts: 6
Joined: Tue Apr 22, 2008 14:11
Product(s): Amilo - EL 6800

[N560] with Memory Map

Postby royshopland » Mon Feb 23, 2009 13:23

I have been using my N560 with Memory Map for some time but it now seems to have given up the ghost! The internal GPS locks on successfully with several green bars showing but there is no longer a position indicator on the appropriate map (loaded onto an SD card). The position lock on the map does not appear to be lit. I cannot be sure but I believe the problem started when I downloaded the latest version of Memeory Map software. Can anyone offer any advice. Many thanks.

jaz4
Posts: 2
Joined: Fri Feb 27, 2009 20:14
Product(s): loox N560

Re: N560 with Memory Map

Postby jaz4 » Fri Feb 27, 2009 20:29

I have MM 5.1.3 716 with no issues. what version are u using

royshopland
Posts: 6
Joined: Tue Apr 22, 2008 14:11
Product(s): Amilo - EL 6800

Re: N560 with Memory Map

Postby royshopland » Sat Feb 28, 2009 14:59

Hi . Many thanks for responding. I use Memory Map 5.2.7 build 890. I believe, although I cannot be sure, that problems started when I updated to the latest build. I now seem to have resolved the situation (using trial and error) by changing the ports. On memory Map set up I am now using Generic(NMEA) with Port COM 7 and Baud 9600. When I go into system GPS settings the GPS program port is also set to COM 7. Are these the settings you are using? Is it just necessary to set both ports at the same setting or does it have to be 7. Many thanks for your interest.


Return to “Handhelds (PDA)”

Who is online

Users browsing this forum: No registered users and 1 guest