Postby Ask Fujitsu » Tue Dec 05, 2023 13:14
Hello,
Thank you for contacting Fujitsu!
Please note that this clears the entire switch configuration, default admin password to adminHow to reset SBAX2:
Login via telnet to the MMB and then go via Console Redirection to the affected Connection Blade.
+----------------------------------------------------------------------------+
| Console Redirection Tablepage_3
+-----------------------------------------------------------------------------+
(1) Console Redirect Connection Blade
(2) Set Return Hotkey , Ctrl+(a character) : Q
(3) Set Console Redirection Timeout : 900
Enter selection or type (0) to quit: 1
+-----------------------------------------------------------------------------+
| Console Redirect Connection Bladepage_3_1
+-----------------------------------------------------------------------------+
(1) CB1:PY CB Eth Switch/IBP 10Gb 18/8(Mode:IBP) - Stacking:N/A
(2) CB2:PY CB Eth Switch/IBP 10Gb 18/8(Mode:IBP) - Stacking:N/A
(3) CB3:PY CB Eth Switch/IBP 1Gb 36/8+2(Mode:Switch) - Stacking:Master
(5) CB5:PY CB FC Switch 8Gb 18/8 26 (Brocade) - Stacking:N/A
(6) CB6:PY CB FC Switch 8Gb 18/8 26 (Brocade) - Stacking:N/A
Enter selection or type (0) to quit: 3
Press Return Console Menu
Now initiate a reset of the switch via the MMB Web GUI
Booting ... <= press “CTRL+B”
Backup firmware mode.
> logon
Waiting for completion of the other operation...
backup# reset clear
Booting ...
Login:
Login: admin
Password: <= standard password “admin”
weak admin´s password: contain at least 8 characters
sw1#
Kind regards,
Forum Support Team