rx300 S8 Fan Speed

PRIMERGY, SPARC Enterprise Server, PRIMEFLEX, PRIMEPower, BS2000

Moderator: ModTeam

toomanylogins
Posts: 28
Joined: Sat Oct 07, 2017 17:00
Product(s): TX100 RX300

rx300 S8 Fan Speed

Postby toomanylogins » Tue Jul 06, 2021 8:12

I have had to set up a Home Office and now have 1 rx300 s7 and 2 rx300 s8 servers on the other side of a glass partition. The noise is deafening. They are used for development only so the workload is very light and have ssd so the total power draw is approx 100w.
Does anybody know how to reduce the fan speed on the servers as they are nowhere near working at full load ? I believe this can be done via the IPMI interface ?
Thanks
Paul

User avatar
Ask Fujitsu
Moderator
Posts: 724
Joined: Fri Aug 02, 2019 10:02
Product(s): n/a
Contact:

Re: rx300 S8 Fan Speed

Postby Ask Fujitsu » Tue Jul 06, 2021 11:19

Hello Paul :D

Thank you for your post on the Official Fujitsu Forum!

We would like to inform you, that described issue requires deeper analysis and hence it might be necessary to provide logs, journals, reports and/or any other additional information which are necessary in troubleshooting process. Please bear in mind, that Official Fujitsu Forum is public and nothing that contains confidential information cannot be post on it. Due to this, please submit a ticket to Fujitsu's Technical Support via one of the given options:
1. Using contact form available on the site: https://support.ts.fujitsu.com/IndexContact.asp?lng=COM tab "Contact us").
2. Contacting one of our ServiceDesk Office in your country. Please visit https://support.ts.fujitsu.com/IndexContact.asp?lng=COM and click "Your Service Desk" tab. You can find contacts to each Fujitsu's Technical Support divisions on the world there.
3. Sending an email to address: technical.support@ts.fujitsu.com. Message sent should contain below information:
- Product ID or serial number of your device
- Operating system on the device
- Description of failure
- Changes of Hardware or Software configuration before malfunction of the system

Thank you,
Primergy Technical Support Team

dkopsieker
Posts: 1
Joined: Thu Aug 05, 2021 14:51
Product(s): Primergy RX300 S8

Re: rx300 S8 Fan Speed

Postby dkopsieker » Thu Aug 05, 2021 17:42

Were you able to find a solution for this? Im running into the same situation with my server. just running it as a home media server with TrueNAS Core.

User avatar
Ask Fujitsu
Moderator
Posts: 724
Joined: Fri Aug 02, 2019 10:02
Product(s): n/a
Contact:

Re: rx300 S8 Fan Speed

Postby Ask Fujitsu » Fri Aug 06, 2021 11:01

Hi,

Can you please follow the same instructions as stated above?

Thank you,
Fujitsu Support Forum


Return to “Server Products”

Who is online

Users browsing this forum: No registered users and 1 guest