Front Panel Pinout Layout for D3034 for PRIMERGY RX100 S7

PRIMERGY, SPARC Enterprise Server, PRIMEFLEX, PRIMEPower, BS2000

Moderator: ModTeam

axmass
Posts: 2
Joined: Thu Mar 04, 2021 8:29
Product(s): d3034

Front Panel Pinout Layout for D3034 for PRIMERGY RX100 S7

Postby axmass » Thu Mar 04, 2021 13:45

Hello.
I am currently looking for information about the front panel pins of the D3034 motherboard.

Sadly there is no details about what each pin is used for in the manual, only general placement on the motherboard.

I want to turn ON/OFF the server via PLC. I decided to use a relay to close the shortcut of the front button panel. I am still wondering how to check the state of the server (Check if it is ON or OFF). Ideas are welcome.

User avatar
Ask Fujitsu
Moderator
Posts: 724
Joined: Fri Aug 02, 2019 10:02
Product(s): n/a
Contact:

Re: Front Panel Pinout Layout for D3034 for PRIMERGY RX100 S7

Postby Ask Fujitsu » Mon Mar 08, 2021 9:49

Hello! :)

The system is out of support.

Please search the following documents:
- https://support.ts.fujitsu.com/IndexDow ... 966E05ADA0
- https://support.ts.fujitsu.com/IndexDow ... 6913E03D93

If there is no information you need, it means that this is internal documentation and cannot be provided.

Best regards,
Fujitsu Forum

axmass
Posts: 2
Joined: Thu Mar 04, 2021 8:29
Product(s): d3034

Re: Front Panel Pinout Layout for D3034 for PRIMERGY RX100 S7

Postby axmass » Mon Mar 08, 2021 15:20

Thank you for your response.
I already managed to find these files. Unfortunately, there are no details on the exact pins purpose. Anyways, thank you again for your help! :)

User avatar
Ask Fujitsu
Moderator
Posts: 724
Joined: Fri Aug 02, 2019 10:02
Product(s): n/a
Contact:

Re: Front Panel Pinout Layout for D3034 for PRIMERGY RX100 S7

Postby Ask Fujitsu » Wed Mar 10, 2021 12:45

You are welcome! :)
Best regards,
Fujitsu Forum


Return to “Server Products”

Who is online

Users browsing this forum: No registered users and 1 guest