In the BIOS I only found options to reduce the energy consumption of the cpu and ram.
I am using Proxmox as my OS and already installed "ipmitool" which works great for reading sensor data.
I tried following this guide(https://www.spxlabs.com/blog/2019/3/16/ ... dge-server) to lower the fan speed. Unfortunately the ipmi raw commands do not work on my server (I thought ipmi was standardized).
When I try to run
Code: Select all
ipmitool raw 0x30 0x30 0x01 0x00
Code: Select all
Unable to send RAW command (channel=0x0 netfn=0x30 lun=0x0 cmd=0x30 rsp=0xc7): Request data length invalid
I would really appreciate if someone could help me lower the fan speed of my server or could provide me a source of the approriate ipmi raw codes.
Thanks a lot in advance, Varsius