System Event Log error codes

PRIMERGY, SPARC Enterprise Server, PRIMEFLEX, PRIMEPower, BS2000

Moderator: ModTeam

_martinb
Posts: 3
Joined: Mon Jan 20, 2020 14:40
Product(s): Fujitsu Primergy

System Event Log error codes

Postby _martinb » Mon Jan 20, 2020 17:02

Hi all,

i have server PRIMERGY TX1330 M2.
I have problem, that server is resetting (hardly) every few minutes after booting.
I have logged in iRMC System Event Log (SEL), that there was Reboot by hardware reset.
It has error code 0D0015.
Does anyone have list of codes, what this error codes mean?
Every component is iRMC is green.

Thank you.

me@work
Posts: 1024
Joined: Thu Jun 22, 2006 15:32
Product(s): Scaleo Pi2662, Primergy

Re: System Event Log error codes

Postby me@work » Wed Jan 22, 2020 8:52

I'm afraid that this error code "0D0015" and the text "Reboot by hardware reset" represent the same thing, and the code itself does not point to some clearer problem source...

I'd suggest to try to boot the server with a live system from CD/DVD; either Windows or some brand of Linux, to rule out any OS or driver causes.
In case the issue still occurs, then remove every additional hardware component that isn't essentially required to boot the machine: only processor, one DIMM, keyboard (perhaps a different one?), and check again.

This would either narrow down the problem sources to these components, or to "all those other items", which you then could add again one after the other, until the problem re-occurs.

_martinb
Posts: 3
Joined: Mon Jan 20, 2020 14:40
Product(s): Fujitsu Primergy

Re: System Event Log error codes

Postby _martinb » Thu Jan 23, 2020 16:11

Thank you for reply,
i have tried to upgrade irmc and bios and hope this can help with diagnostics.

galym_rai@mail.ru
Posts: 4
Joined: Thu Jan 20, 2022 12:09
Product(s): Fujitsu Server RX 300 S7, S8

Re: System Event Log error codes

Postby galym_rai@mail.ru » Thu Jan 20, 2022 12:16

Hello!
Tell me, did you manage to solve this problem? It will be enough to update the BIOS to solve the problem with the automatic reboot of the server. I have the same messages on my server too. Thank you.

_martinb
Posts: 3
Joined: Mon Jan 20, 2020 14:40
Product(s): Fujitsu Primergy

Re: System Event Log error codes

Postby _martinb » Thu Jan 20, 2022 14:15

Finally there was problem with power button.

galym_rai@mail.ru
Posts: 4
Joined: Thu Jan 20, 2022 12:09
Product(s): Fujitsu Server RX 300 S7, S8

Re: System Event Log error codes

Postby galym_rai@mail.ru » Fri Jan 21, 2022 3:41

Can you elaborate on your actions?

galym_rai@mail.ru
Posts: 4
Joined: Thu Jan 20, 2022 12:09
Product(s): Fujitsu Server RX 300 S7, S8

Re: System Event Log error codes

Postby galym_rai@mail.ru » Fri Jan 21, 2022 6:30

_martinb wrote:Finally there was problem with power button.


Thanks a lot for the hint. Replacing the power button block solved the problem!


Return to “Server Products”

Who is online

Users browsing this forum: No registered users and 1 guest