Problem in going into BIOS

PRIMERGY, SPARC Enterprise Server, PRIMEFLEX, PRIMEPower, BS2000

Moderator: ModTeam

Kubikszon
Posts: 2
Joined: Sat Jan 11, 2020 11:59
Product(s): PRIMERGY RX300 S4
PRIMERGY RX300 S3

Problem in going into BIOS

Postby Kubikszon » Thu Jan 16, 2020 17:56

Hi,
I've recently bought a PRIMERGY RX300 S4 server. I've cleaned it and turned it on, and went into BIOS without any problem. Then I changed CMOS battery and server does not boot to BIOS any longer. This server has aftermarket memory installed (FB-DIMM, 4GB, 667MHz, made by Kingston) and only 3 fans instead of 4. Additionally when powered on it sits on Fujitsu logo without any text (no option to go to BIOS) and shuts down approx. 5 minutes after powering it on. When it is started while I am holding ID button it sits on Fujitsu logo as well. Is it a fan problem or it's something else?

Kubikszon
Posts: 2
Joined: Sat Jan 11, 2020 11:59
Product(s): PRIMERGY RX300 S4
PRIMERGY RX300 S3

Re: Problem in going into BIOS

Postby Kubikszon » Thu Jul 23, 2020 13:17

I've finally got my hands on the fourth fan, flashed the BIOS using recovery+password skip DIP switches, but it's still the same. No CSS LED, server shows Fujitsu logo, but no "F2 to enter BIOS..." and after about 5 minutes shuts itself down with blinking global error LED. I think iRMC is initialized as it's LED is blinking (green, top middle), but PS/2 keyboard is not - no LED at caps lock, num lock... I have no idea what do do at this point.

User avatar
Ask Fujitsu
Moderator
Posts: 724
Joined: Fri Aug 02, 2019 10:02
Product(s): n/a
Contact:

Re: Problem in going into BIOS

Postby Ask Fujitsu » Tue Jul 28, 2020 11:19

Hello,

We forward your enquire to our technical team and this was their advice:

The best will be connect to iRMC and check what system is show of problem, manual below
Direct download
https://support.ts.fujitsu.com/IndexDow ... E7AA297E4C


Return to “Server Products”

Who is online

Users browsing this forum: No registered users and 1 guest